Quality inspection of beam structure, in order to determine the bearing capacity of the floor beam system to calculate and evaluate the bearing capacity of floor beams when loading additional loads.
Quality inspection of beam structure is the inspection of changes between the existing structure and the original design drawing, is to check the circumferential dimensions of the beam cross section; Test the strength of concrete beams (Bouncing gun measures concrete strength); Ultrasound determines the amount of steel in the beam, what is the diameter of the steel; Check for damage, cracks of beams (if any). Modeling the bearing capacity of the floor beam frame system, assessing the load placed on the structural frame of the house.
Testing to determine the quality of the structure to be able to withstand normal use, or to increase the load, to be able to safely bear the load, (if any) or to provide a solution to strengthen the structural frame.
Factory Inspection – Inspection Vietsum presents the pictures at the construction site:
INSPECTION SERVICE IMPROVEMENT WORKSHOP 245 M2 MEZZANINE; TÂY NINH
Implementation Motto: Reputation – Honesty – Visual.
Standards – applicable regulations
TCVN 4453-1995: Concrete and reinforced concrete structures of the whole block, construction and acceptance regulations.
TCVN 5574: 2012: Design standards for concrete and reinforced concrete.
TCVN 5575: 2012: Steel structures – Design standards
TCXDVN 239: 2006: Heavy concrete, instructions for assessing concrete strength on building structures.
TCVN 9334: 2012: Heavy concrete – Method for determining compressive strength by bouncing gun.
TCVN 9356: 2012: Reinforced concrete structures – Electromagnetic method to determine the thickness of protective concrete layer, position and diameter of reinforcement in concrete – Standard
TCVN 10304:2014: Pile foundations – Design standards.
TCVN 9362:2012: Design standards for foundations of houses and works. – Standard
TCVN 2737: 1995: Loads and actions – Design standards.
TCVN 9381:2012: Guidelines for assessing the level of danger of building structures.
TCVN 9259-8:2012: Tolerances in building construction – Part 8: Dimensional inspection and construction inspection;
TCVN 9259-1:2012: Tolerances in building construction – Basic principles for assessment and technical requirements; – Other relevant professional standards and regulations.
PICTURE OF INSPECTION SERVICE IMPROVEMENT WORKSHOP 1 245 M2 MEZZANINE; TÂY NINH.
Photo: Check the size of the footing before raising the floor.
Photo: Check the current concrete strength of the floor beam system.
Photo: Check the existing diameter of the beam reinforcement of the floor beams.
Photo: Check width and depth of existing wall cracks.
When the Investor wants to evaluate the structural quality of the column, beam, and floor frame system, in order to increase the load due to the needs of use and production, and have accurate conclusions about the bearing safety capacity for works, factories: Please contact Vietsum Construction Consultancy and Quality Control Joint Stock Company (VCQC) for inspection advice to serve the load-bearing safety assessment of the factory.
Hotline: 090 959 8771 – Mr Nam
— “Vietsum successfully accompanies customers’ workshop” —
